VMDV - Diaphragm valve DN 80:100

Diaphragm valve with male ends for solvent welding, metric series.

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

Main features:

  • Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability
  • Metal optical position indicator supplied as standard
  • Full protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing area
  • Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace
  • Threaded metal inserts for anchoring the valve
  • New valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation
Go back

EPDM

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] H H[5:1] h I J L g
VMDV090E EPDM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 90 80 *10 225 55 300 200 23 100 M12 51 7000
VMDV110E EPDM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 110 100 *10 295 69 340 250 23 120 M12 61 10500

*PTFE PN6

FKM

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] H H[5:1] h I J L g
VMDV090F FKM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 90 80 *10 225 55 300 200 23 100 M12 51 7000
VMDV110F FKM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 110 100 *10 295 69 340 250 23 120 M12 61 10500

*PTFE PN6

PTFE

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] H H[5:1] h I J L g
VMDV090P PTFE The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 90 80 *10 225 55 300 200 23 100 M12 51 7000
VMDV110P PTFE The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation *PTFE PN6 - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 110 100 *10 295 69 340 250 23 120 M12 61 10500

*PTFE PN6

  • Connection system for solvent welding and for flanged joints
  • Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body
  • Handwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torque
  • Standard optical indicator
  • Internal operating components in metal totally isolated from the conveyed fluid
  • Bonnet fastening screws in STAINLESS steel protected against the external environment by PE plugs
  • New flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance.

Downloads